Feeding sync signals like pps or gpio to Drive orin to sync camera and lidar

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.8.1
DRIVE OS 6.0.6
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
DRIVE OS 6.0.4 SDK
other

Target Operating System
Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-300)
DRIVE AGX Orin Developer Kit (940-63710-0010-200)
DRIVE AGX Orin Developer Kit (940-63710-0010-100)
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other

SDK Manager Version
1.9.3.10904
other

Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

Hi,

Is there any solution available to sync lidar and camera in the drive orin? Can we feed external pps or gpio signal to Orin? I wish to trigger the camera at the same time lidar scan starts.

Thanks!!
Jishnu

Please refer to the ‘Orin Time Sync’ page and see if it can help with this.

Additionally, which lidar you are using supports this use case of triggering scans via gpio/pps signal?

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.