NVSIPL no camera output

Autonomous Vehicles DRIVE AGX Xavier DRIVE AGX Xavier General
1

Please provide the following info (check/uncheck the boxes after creating this topic):
Software Version
[*] DRIVE OS Linux 5.2.6
DRIVE OS Linux 5.2.6 and DriveWorks 4.0
DRIVE OS Linux 5.2.0
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
other

Target Operating System
[*] Linux
QNX
other

Hardware Platform
[*] NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
other

SDK Manager Version
1.9.1.10844
other

Host Machine Version
[*] native Ubuntu 18.04
other

Hello there. Initially, i had this issue: ModeSetCrtc failed for mode index 0
Following the steps, i was able to get a camera output using a 4K monitor from the SF3225. When trying to switch to smaller monitors, i am unable to make it work. When starting nvsipl_camera, the display turns on then off saying no input signal.
I am working with HP monitors

2

i was able to get a camera output using a 4K monitor from the SF3225. When trying to switch to smaller monitors, i am unable to make it work

Dear @david.nevezi-strango ,
Does that mean after connecting to lower resolution monitor, you can see display at first. But as soon as you launch nvsipl_camera, the display goes off? Do you see any error on console?

3

No, so after starting up nvsipl_camera, the power led turns on then immediately turns off. The console says repeatedly fmon_nvdisplayhub rate 2781250 bewlow min 1875000 and fmon_nvdisplayhub detected fault 0x4000. Otherwise i get the output of 30 fps on the terminal but no image on the monitor
I would like to mention that i do not have ubuntu desktop installed since i am unable to install some packages required for gdm3